Avery Dennison Monarch 932 Stacker - Manual (Page 9)

S t e p 4 - C h e c k t h e A l i g n m e n t
1. Load supply in the printer. For more information about
loading supply, refer to the printer’s Operator’s Handbook
or
Quick Reference .
2. Set aside the tag weight.
3. Widen the guide rails to the maximum width by pulling and
extending the guide rails out of the grooves at the bottom of
the tray.
4. Slide the rod ends of the guide rails by using both hands to
the outer position.
Getting Started
1-5
Grooves
Guide Rails