Avery Dennison SNAP 700 RFID Linear Knife - Manual (Page 34)

34

Snap Linear Knife
1. Damaged sensor 1. Replace sensor harness assembly.
Reflective sensor error 1. Sensor not aligned with mark 1. Move senor in align with registration mark
1. Sensor mark to small 1. Registration mark spec is 1/8” wide in the feed
direction and 3/8” wide across the web.
1. Sense mark contrast range to
close
1. Supplies not compatible with sensor
Knife did not home 1. Carriage may be out of sensor
range
1. Place carriage between front and back sensors.
1. Knife pulley may have become
loose missing.
1. Tighten or replace set screws on the knife
pulley.