Aviosys 9223K-D - Manual (Page 11)

- 11-
Ref#9223KD0001
1.) First connect the cables to the 9223K-D. Make sure that you have stripped enough of the
cable so that the contacts can fit into the 9223K-D.
a. During this part you will need to decide whether each relay will start normally
open or normally closed. Once you have decided, carefully unscrew the inputs
and place the contacts into the input area and screw on tightly.
2.) Plug in the network cable RJ45 into the 9223K-D
3.) After correctly installing steps 1 and 2 for the very last step plug in the power line power
adaptor.
Notice :
User can only select one power input :
* Green terminal power lien in . OR * Black power jack for adaptor.
or
The board will be damaged if user plug in 2 power input which is misuse and out of warranty
support.
Internet Accessible Setup
To be able to access the 9223K-D through the internet, the user must port forward on the router.
Since each router is different, please refer to the routers manual on how to port forward the
device. Once the device has been successfully port forwarded the use can connect the device
from the internet.