Axel Remote Management V2 - Manual (Page 51)

Axel Remote Management
45
Below is the icon and corresponding dialog box:
icon
The name of the set-up file must be given in the "Set-up File" field.
Note: the [...] button can be used to navigate to the location of the setup file.
The "Reboot after command" box is always ticked. (The terminal will
automatically reboot after receiving the new configuration and register the new
changes.)
Note: if the terminal is password protected the password must be entered in the
"Password" field.
An enhanced dialog box is displayed if AxRM is set in this way (see Chapter
7.3.2, sub-chapter b). Additional parameters are offered by this box: