Axel Remote Management V2 - Manual (Page 74)

68
Axel Remote Management
This chapter describes more operations possible with AxRM.
7.1 - ASSIGNMENT OF AN IP ADDRESS
The basic functions of AxRM require the terminal to already have a valid IP
address.
If the terminal does not have an address IP (or has an unknown address IP
factor), it is possible to re-apply a new address IP if the serial number or
Ethernet MAC address of the terminal are known.
Note: the serial number and the Ethernet address are given on the label on the
bottom of the terminal.
Important: this function is only available if:
- The terminal and the AxRM machine are on the same network (This
function does not work through routers as routers work at the IP level and
this command works at the hardware MAC address level).
- Firmware supports this function. (Firmware 0303a or higher for terminals
or 9926a or higher for the Office Servers)