Baby Lock Spirit (BLPY) Instruction and Reference Guide - Manual (Page 137)

EDITING PATTERNS
Em
br
oide
ry
Ed
it
Embroidering E-71
E
2
d
Press .
→ The “Saving” screen is displayed. When the data is
saved, the display returns to the original screen
automatically.
■ Recalling the Custom Thread Table
data from USB media
You can recall a custom thread table data from USB
media.
a
Insert the USB media containing the custom
thread table data into the USB port.
a USB port
b USB media
b
Press and then press .
c
Press .
→ The “Saving” screen is displayed. When the data is
loaded to the machine, the display returns to the
original screen automatically.
d
The recalled custom thread table is
displayed on the screen.
Note
• Do not insert or remove USB media while
“Saving” screen is displayed. You will lose
some or all of the data you are saving.
Note
• Do not store two or more “.pcp” data file in
USB media. You can only recall one custom
thread table data at a time.
Note
• Do not insert or remove USB media while
“Saving” screen is displayed. You will lose
some or all of the data you are saving.