Baby Lock Spirit (BLPY) Instruction and Reference Guide - Manual (Page 144)

EDITING PATTERNS
E-78
e
Rehoop the fabric in the embroidery frame.
f
Attach the embroidery frame to the
machine, and then touch
.
g
Touch to set the starting point to the
center top of the pattern.
h
Touch .
i
Press the positioning keys to move the
embroidery frame until the starting point is
aligned with the thread mark on the fabric.
a Positioning keys
* Press to check the embroidering position.
j
Remove the thread mark.
k
Press the “Start/Stop” button to begin
embroidering.
Note
• Adjust the position of the fabric so that the
embroidering area for the next pattern is
within the embroidering area of the
embroidery sheet.
a Pattern embroidered first
b Position of pattern to be embroidered next
c Embroidering area of embroidery sheet
a