Charging with a battery charger, Charging with the dock – Datalogic Scanning 4410 User Manual
Page 16
Getting Started
14
Falcon
®
4400 Series with Windows
®
CE
Charging with a Battery Charger
A LiIon Four-Slot Battery Charger is available to charge batteries indepen-
dently from the Falcon. To use, align the battery contacts with those in the
Charger and insert them into the slots.
Figure 5. Four-Slot Battery Charger
Charging with the Dock
There are two models of docks for the Falcon: a Single-Slot Dock and a Four-
Slot Dock. On both models, an external power supply (AC adaptor) provides
power to the dock. Falcons communicate with the host PC using Microsoft
ActiveSync protocol either via a USB port or via a serial port.
There are two methods for charging a battery pack using a Single-Slot Dock.
Refer to Table 3 on page
to view methods of battery pack charging using
the dock, charge duration, dock status indicators and their purpose. For more
information on the dock, refer to the Dock Operating Instructions that come
with each dock.
Power Indicator LED
Use only the correct battery chargers and docks with this Windows CE color Fal-
con. This technology used for these models is incompatible with other Datalogic
Mobile Falcon chargers and docks, including the Falcon 4410/4420 monochrome
models.