Datalogic Scanning 4410 - Manual (Page 19)

Setting Up the Mobile Computer
Quick Reference Guide 17
For detailed instructions, reference the PRG.
Connecting to a PC
In order for the Falcon to communicate with a host PC, Microsoft® ActiveSync must
be installed on the computer. Go to www.microsoft.com/downloads/ for information.
Reference the PRG for detailed instructions.
Installing the USB Driver
So the Host PC can communicate with the Falcon, install the USB driver file
from the CD that came with the Falcon, or download it from the Datalogic
website. Follow the directions on the CD, or use the following instructions:
1. Microsoft
®
ActiveSync must be installed on your computer before pro-
ceeding. Go to www.microsoft.com for information.
2. Copy the current USB driver file from the Falcon CD to the C:\Pro-
gram Files\Microsoft ActiveSync\Drivers .
3. Connect the USB cable to the Falcon or place the Falcon in the dock.
4. Connect the USB cable to the Host PC.
5. Follow directions on screen. The specified source directory is the one
identified in step 2.
Serial Cable Setup
1. To connect the Falcon using a Serial cable, go to Start > Settings > Control
Panel > PC Connection .
2. If not already checked, select Enable direct connections to the desktop com-
puter.
3. Tap Change Connection and select Serial from the dropdown box.
4. Tap OK .
IP Network Setup
1. Select Start > Settings > Network and Dialup Connections .
2. Double-tap on the item (varies based on the radio installed and the number of
connections).
3. Complete the two tabs (shown in Figure 8 ):