Setting the date and time, Entering data, Using the – Datalogic Scanning 4410 User Manual
Page 21
Entering Data
Quick Reference Guide
19
Setting the Date and Time
To set or change the date and time, complete the following steps:
Figure 9. Setting the Date and Time
Entering Data
To open applications, select
Start > Programs
to display a
list of available pro-
grams. If the program has an icon on the desktop, double-tap to open it.
There are several ways to enter data with the Falcon:
•
Use the keypad. Refer to Keypads starting on page
•
Use the stylus on the touchscreen display. Refer to Using the Stylus on
page
for more information on using the stylus.
•
Use the soft input panel (digital keyboard) with the stylus. Refer to
Soft Keypad/Input Panel on page
•
Select text in the same way you select text on a PC. Use the stylus to
highlight the desired text by dragging the stylus across the desired
text, double-tapping to select one word, and triple-tapping to select
an entire line.
•
Use the bar code scanner to enter data. Press the trigger or scan button
to initiate a scan. The scanned data will be entered into the current
1. From the Start menu, select
Settings >
Control Panel > Date/Time
to open the
Date/Time
Properties
control panel.
Use the arrows in the application to
navigate, increase or decrease the
time or date.
2. Select the year to open a field where
you can change the year by backspac-
ing, or entering a new year.
3. Select the month to open a pull-
down list of months.
4. Tap the checkbox to
Automatically
adjust clock for daylight savings time
, if
desired.