Datalogic Scanning 4410 - Manual (Page 20)

Setting Up the Mobile Computer
18 Falcon
®
4400 Series with Windows
®
CE
Figure 8. Modifying Network Connection Settings.
• IP Address : Select DHCP or set static IP settings.
• Name Servers : If using static IP, set DNS and WINS servers.
RF Setup (Summit Client Utility)
The Summit Client Utility (SCU) is an application designed for users and administra-
tors of mobile devices that use a Summit radio module. Using SCU, you can:
• Disable and enable the radio (turn it off and on)
• View the contents of configuration profiles, or configs, each of which houses
the RF, security, and other settings for the radio
• Select the config to be used to connect to a WLAN
• View global settings, which apply to every config
• View status information on the radio, the access point (AP) or WLAN router to
which it is connected, and the RF connection or link between the two
• Troubleshoot a connection or performance issue, view in-depth diagnostic
information on the connection and the radio, and perform various trouble-
shooting and diagnostic tests
1. To launch the utility, go to Start > Settings > Control Panel.
2. Tap on the Wi-Fi icon.
For more detailed information on making changes to settings, please refer to the PRG.