Datalogic Scanning 4410 - Manual (Page 17)

Getting Started
Quick Reference Guide 15
Figure 6. Charging the Battery Pack in a Single-Slot Dock
Refer to Table 3 on page 13 for a list of LED indicators and their purpose.
Refer to the PRG for additional information on storage and disposal of batter-
ies.
Backup Battery
The 3V Lithium Backup Battery receives its charge from the Battery Pack. To
retain date, time, data, and other settings for the Falcon, maintain at least a
minimal charge on the Battery Pack.
When the backup battery is low, an icon will display on the status bar (see
Table 2 on page
12 ), and a dialog box will open to alert you.
Battery Discharge Characteristics
Battery discharge characteristics vary from eight to nine and a half (8-9.5)
hours, depending upon device usage, number of scans per minute, backlight
usage, and other factors that draw upon battery power.
Spare Battery LED
Power LED
Power Port
RS-232 Serial Port
USB Port
Battery Tab
USB/Serial Connector
Battery Pack in
Spare Battery
Charging Slot
Top/Rear View of Single-Slot Dock
Battery Pack in
Spare Battery
Charging Slot