BECKHOFF EL6930 - Manual (Page 40)

Operation
38 EL6930
4.2.10 Loading the project into the EL6930
The project is loaded into the EL6930 via the fieldbus.
CAUTION
Use only qualified tools
Only use a qualified tool for loading, verifying and enabling the project on the EL6930!
Click the Download button on the TwinSAFE Verifier tab for loading the project.
The user must enter
•
his user name (default: Administrator),
•
the terminal serial number (printed on the outside, e.g. 197535), and
•
his password (default: TwinSAFE).
Note
Case-sensitive
Pay attention to upper/lower case characters for the user name and password.
User name and password are case-sensitive!
The project is then displayed in text mode, and the user has to confirm consistency between the
information displayed and the currently projected application by re-entering the password. The project is
then started on the EL6900/EL6930.