1 step/direction with 5 v signal level (x4), 2 step/direction with 24 v signal level (x3), P.60 – BECKHOFF AX2500 User Manual
Page 60
Advertising
8.14.5.1
Step/Direction with 5 V signal level (X4)
Connection of the servo amplifier to a stepper motor control with a 5 V signal level. The
SubD connector X4 is used for this purpose.
Frequency limit: 1 MHz
AGND (terminal X3/1) must be connected to the ground of the control system!
8.14.5.2
Step/Direction with 24 V signal level (X3)
Connection of the servo amplifier to a stepper motor control with a 24 V signal level. The
digital inputs DIGITAL-IN 1 and 2 on connector X3 are used for this purpose.
Frequency limit: 100 kHz
AGND (terminal X3/1) must be connected to the ground of the control system!
60
AX2500 Product Manual
Electrical Installation
06/2007
BECKHOFF
AX2500
AX2500
Advertising