Bolide BN1008 - iCube - Manual (Page 28)

24
PRODUCT USER MANUAL BN1008 - iCube
Click “Default” button to restore the default setting; click “Apply” button to save the
setting.
3.5.2.5 Video Cloud
Enter into “Config”àRemote ConfigàLiveàVideo Cloud; refer to Fig 3-23:
User can set the private mask area for each channel. The number key at the top left
shows the channel number; it is related to the device model. This figure takes the 4ch
device for example.
Fig 3-23
Set mask area: Click “Edit” button, then click and drag cursor to set the privacy area of
video image. An image can be entirely or partially masked, it supports 4 areas
(superposable) at maximum. Click area to select this area, click again to deselect. Click
“Clear all” button to clear all privacy areas; click “Clear” button to clear selected privacy
area; click “Save” button to save the setting; click “Back” button to return to the previous
window.
Privacy area configuration can be copied to the other channel. Click “Copy” button to
copy the specified channel settings to other channel or all channels.
Click “Default” button to restore the default setting; click “Apply” button to save the
setting.
3.5.3 Record Configuration
Record configuration includes three submenus: record basic, record bitrate and
snap.
3.5.3.1 Record Basic
Enter into “Config”àRemote ConfigàRecordàRecord Basic; refer to Fig 3-24:
The number key at the top left shows the channel number; it is related to the device
model. This figure takes the 4ch device for example.