Bolide BN1008 - iCube - Manual (Page 33)

29
PRODUCT USER MANUAL BN1008 - iCube
change .
④ Select a plan in the week schedule list, click delete button to delete the
selected plan.
Fig 3-30
⑤ Day schedule configuration can be copied to the other date . Click “Copy”
button to copy the specified schedule settings to other date or all dates .
⑥ Click “OK” button to save the setting, click “Cancel” button to exit current
interface.
Step4: Schedule configuration can be copied to the other channel or all channels.
Select "Copy this config to" to the date or "All" which set as the same settings, click "Copy"
button.
Step5: Click “Default” button to restore the default setting; click “Apply” button to
save the setting.
3.5.4.2 Sensor Record
Change the record type to sensor alarm record; the setup steps of sensor are similar
to schedule; user can refer to Chapter 3.5.4.1 Schedule for details.
Note: The default schedule of sensor alarm is full-selected, that is, the color of
schedule setting interface is blue.
3.5.4.3 Motion Record
Change the record type to motion detection record; the setup steps of motion are
similar to schedule; user can refer to Chapter 3.5.4.1 Schedule for details.
Note: The default schedule of motion detection is full-selected, that is, the
color of schedule setting interface is blue.