Bolide BN1008 - iCube User Manual
Page 53
Advertising
49
PRODUCT USER MANUAL
BN1008 - iCube
3)
Patrol
Click “Patrol" tab of PTZ control panel, it supports 8 patrols; refer to Fig 4-8:
Fig 4-8
a)
Select a patrol line and click Run
button; PTZ rotates on a timed interval, in
accordance with the configured preset sequence; click Stop
button to stop
PTZ patrol.
b)
Click Add
button to enter the Setup Patrol window, as shown below:
Fig 4-9
User can set the number and name of
the patrol line. Click Add
button to select
the patrol’s preset, and its speed rate, time; as
shown on the right. Click OK button to add this
preset to patrol, or click Cancel button to
cancel adding.
Advertising