Compuprint 6314 CZL - Manual (Page 22)

CZL – Programmer Manual
22
h is the letter Y 73 if printing of the human readable field is desired, N if not.
p is the letter Y (yes) or N 74 (no). If the human readable field is desired (when h=Y) it is possible to
position it above (p=Y) or below (p=N).
c is the letter Y (yes) or N 75 (no). Y if the check digit is to be added, N if not.
^BCr,a,h,p,c,m (Code 128)
This is a high-density code, accepts numerals and letters (both upper and lower-case), and its length
is variable, with optional check digit. Its ratio is fixed (see table 8 on page 49).
Code 128 accepts three character subsets (see table 2), and each of these contains 106 characters
that can be printed differently for each subset.
73
Default value.
74
Default value.
75
Default value.