Compuprint 6314 CZL - Manual (Page 32)

CZL – Programmer Manual
32
misinterpretations, the comma (and/or the exclamation point) are inserted after an even number of
characters.
For example, 1FF0, must be sent rather than 1FF0000000 and not 1FF,. Otherwise, 1FFF000000
can be transformed into 1FFF,.
The editor or application being used can introduce special characters (<CR> and/or <LF>) to break
the line: the CZL emulation ignores them.
~DN (Abort Download Graphic)
This command makes it possible to interrupt loading of graphic images onto the printer before it is
completed. The printer then returns to normal print mode. However, any other ^ or ~ command
interrupts loading.
^XGs:aa…a.eee,m
x
,
m
y
(Recall Graphic)
This command is used to recall the graphic image to be printed (e.g. company logo).
Once the image has been stored in memory with the ~DG command on page 30, it is possible to
recall it whenever necessary (even many times), just as it is possible to use it together with other
images and/or fields inside the same label.
s: is the unit where the image is stored in memory. R:
138 indicates RAM, B: (C: or D:) flash
memory 139 . This parameter is optional.
aa…a is the name attributed to the graphic image. It can be from 1 to 8 characters long and the
default value is UNKNOWN.
m
x
is the multiplier along the x axis. It is a whole number between 1 140 and 10.
m
y
is the multiplier along the y axis. It is a whole number between 1 141 and 10.
.eee is the extension of the name, which must be .GRF for graphic images.
^IMs:aa…a.eee (Image Move)
This command, just like the ^XG command, permits recovery of a previously saved graphic image.
The only difference is that it is not possible to change its size, and it requires less processing time.
s: is the unit where the image is stored. R:
142 indicates RAM, B: (C: or D:) flash memory 143 . This
parameter is optional.
aa…a is the name attributed to the graphic image. It can be from 1 to 8 characters long, and the
default value is UNKNOWN.
.eee is the extension of the name, which must be .GRF for graphic images.
138 Default value.
139 See note 136 on page 30.
140 Default value.
141
Default value.
142
Default value.
143
See note 136 on page 30.