Compuprint 6314 CZL - Manual (Page 34)

CZL – Programmer Manual
34
or vice-versa, as well as downloading or uploading images onto the expander cards before inserting
them in other machines.
The source and/or destination units must be available on the machine in use, otherwise the move
will not be completed. Please refer to the User Manual for more information.
^TOs:a
s
a
s
…a
s
.e
s
e
s
e
s
,d:a
d
a
d
…a
d
.e
d
e
d
e
d
(Transfer Object)
s: the source unit from which the object will be moved. R: indicates RAM, B: (C: or D:) flash
memory 149 .
a
s
a
s
…a
s
name of the source graphic file. It can be from 1 to 8 characters long and can include the
wildcard characters * and ? 150 .
.e
s
e
s
e
s
is the file name extension for graphic images, which is .GRF. It can be replaced by the
wildcard characters * and ? 151 .
d: is the destination unit to which the object is moved. R: indicates RAM, B: (C: or D:) flash
memory 152 .
a
d
a
d
…a
d
is the name of the graphic image destination. It can be from 1 to 8 characters long and can
include the wildcard characters * and ? 153 .
.e
d
e
d
e
d
is the file name extension for graphic images, which is .GRF. It can be replaced by the
wildcard characters * and ? 154 .
If the destination unit does not have sufficient space to save all objects, only those that fit are
moved. To avoid problems in case any doubt exists, it is good practice to check the list of objects
actually moved by using the commands ^HW (page 39) and/or ^WD (page 39).
^IDs:aa…a.eee (Item Delete)
This command enables deletion of saved objects (only from RAM), and it is capable of selecting
them one by one.
Since this command can include the wildcard characters * and ?
155 , it is possible to cancel groups of
objects as well.
s: is the unit where the object is saved (which must be R:).
aa…a is the name assigned to the object. It can be 1 to 8 characters long and its default value is
UNKNOWN.
.eee is the file name extension, which is .GRF 156 for graphic images and .ZPL for formats (see
section 3.1.8.5 on page 37).
149
See note 136 on page 30.
150 * means “one or more occurrences of any character,” ? signifies “one and only one occurrence of any character.”
151 See note 150 on page 34.
152 See note 136 on page 30.
153 See note 150 on page 34.
154
See note 150 on page 34.
155
See note 150 on page 34.
156
Default value.