Compuprint 6314 CZL - Manual (Page 40)

CZL – Programmer Manual
40
aa…a is the name of the desired list, and it may contain the wildcard characters * and ? 178 . It can be
from 1 to 8 characters long and its default value is *.
.eee is the file name extension, and it too may contain the wildcard characters * and ? 179 .
The strings, fixed in length, returned by the printer have a defined format:
<STX><CR><LF>
- DIR R: xx<CR><LF>
*
(aaaaaaaa.eee((nnnnnn(((((<CR><LF>
*
(aaaaaaaa.eee((nnnnnn(((((<CR><LF>
<CR><LF>
- xxxxxxx bytes free<CR><LF>
<ETX>
where aaaaaaaa is the name of the object, eee is its extension, and the symbol
( indicates a space.
This command is processed in the order in which it is sent to the printer. The printer returns the list
of objects saved as soon as it can consistently with the operations that it was already performing at
the time the command was received.
3.1.8.6 Copies of labels
^PQt,p,d,c (Print Quantity)
This command makes it possible to print the same label t times while checking several operations,
such as the number of labels, before the machine pauses, and the number of copies for each serial
field (see section 3.1.8.3 on page 36).
t is a whole number between 1
180 and 99,999,999 that indicates the number of copies desired.
p is a whole number between 0 181 and 99,999,999 that indicates the number of copies printed before
the machine is paused.
d is a whole number between 1 182 and 99,999,999 that indicates at what point in the printing
operation it is desired to increase the serial fields. In practice, it is possible to print the same label
d times without increasing the field.
o is the letter Y to prevent the printer from going into pause after p labels; it is the letter N 183 for
enabling the parameter p, in other words, to pause the printer after p labels.
178 See note 150 on page 34.
179 See note 150 on page 34.
180 Default value.
181
Default value.
182
Default value.
183
Default value.