Comtech EF Data SNM-1001L - Manual (Page 98)

SNM-1001L Satellite Modem Revision 1
Front Panel Operation MN/SNM1001L.IOM
4–34
FUNCTION SELECT: CONFIGURATION: LOCAL AUPC:
NOMINAL POWER (CONDITIONAL)
NOMINAL POWER
-10.0 dBm
IMPORTANT
Conditional: This menu is displayed when Local Modem AUPC = ON
located under the Utility: Modem Type menu.
Programs the nominal power value of the AUPC. The nominal power value can range from 0 to -
40 dBm, in 0.5 dBm steps.
Upon entry, the current nominal power value is displayed. Press [
↑] or [↓] to increment or
decrement the digit at the flashing cursor. Press <ENTER> to execute the change.
FUNCTION SELECT: CONFIGURATION: LOCAL AUPC:
MINIMUM
POWER (CONDITIONAL)
MINIMUM POWER
-30.0 dBm
IMPORTANT
Conditional: This menu is displayed when Local Modem AUPC = ON
located under the Utility: Modem Type menu.
Programs the minimum power level of the AUPC. The minimum power level can range from 0 to
-40 dBm, in 0.5 dBm steps.