Comtech EF Data EQ90 Series - Manual (Page 10)

EQ90 Series Preface
Rev. 2 vii
485, etc.). All other references in the manual will be shown with the EIA designations
(EIA-232, EIA-485, etc.) only.
Military Standards
“MIL-STD-188” apply to the 114A series (i.e., MIL-STD-188-114A), which provides
electrical and functional characteristics of the unbalanced and balanced voltage digital
interface circuits applicable to both long haul and tactical communications. Specifically,
these references apply to the MIL-STD-188-114A electrical characteristics for a balanced
voltage digital interface circuit, Type 1 generator, for the full range of data rates. For
more information, refer to the Department of Defense (DOD) MIL-STD-188-114A,
“Electrical Characteristics of Digital Interface Circuits.”
Trademarks
Windows is a trademark of Microsoft Corporation. Other product names mentioned in
this manual may be trademarks or registered trademarks of their respective companies
and are hereby acknowledged.
Reporting Comments or Suggestions Concerning this Manual
Comments and suggestions regarding the content and design of this manual will be
appreciated. To submit comments, please contact the Comtech EFData Customer Support
Department.
Low Voltage Directive (LVD)
The following information is applicable for the European Low Voltage Directive
(EN60950):
<HAR> Type of power cord required for use in the European Community.
!
CAUTION: Double-pole/Neutral Fusing.
ACHTUNG: Zweipolige bzw. Neutralleiter-Sicherung.
International Symbols:
Symbol Definition Symbol Definition.
Alternating Current. Safety Ground.
Fuse. Chassis Ground.