DFI AR100-DR - Manual (Page 36)

36
2
Hardware Installation
The Serial ATA connectors are used to connect Serial ATA devices. Connect one
end of the Serial ATA cable to a SATA connector and the other end to your Serial
ATA device.
BIOS Setting
Configure Serial ATA in the Integrated Peripherals submenu (“OnChip SATA De-
vice” section) of the BIOS. Refer to chapter 3 for more information.
SATA (Serial ATA) Connectors
SATA 2 SATA 3
SATA 1 SATA 0
1
7
RXN
GND
TXP
TXN
GND
RXP
GND