Bios setup pc health status – DFI AR100-DR User Manual
Page 63
63
3
BIOS Setup
PC Health Status
Case Open Warning
Set this field to Enabled to allow the system to alert you of a chassis intrusion
event.
Current System Temp to VBAT (V)
These fields will show the output voltage, temperature and fan speed of the
monitored devices or components.
System Fan Temperature
Selects the temperature of the system.
System Fan Tolerance Value
This field is used to select the tolerance value of the system’s temperature. The
options are 1, 2, 3, 4 and 5. If you selected 3, it allows the temperature to run
3 degrees higher or lower. The system fan will smartly adjust it’s speed in accor-
dance to the temperature.
Phoenix - AwardBIOS CMOS Setup Utility
PC Health Status
Item Help
Menu Level
↑↓→←
: Move
Enter: Select
F1: General Help
+/-/PU/PD: Value
F10: Save
ESC: Exit
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Case Open Warning
Current System Temp
Current CPU Temperature
System Fan Speed
CPU Fan Speed
CPU Voltage
+5V
Chipset Voltage
DDR3 Voltage
+12V
VCC3 (V)
VBAT (V)
System Fan Temperature
System Fan Tolerance Value
CPU Fan Temperature
CPU Fan Tolerance Value
[Disabled]
1.25V
5.02V
1.20V
1.77V
12.04V
3.24V
3.24V
[35
o
C / 95
o
F]
[5]
[35
o
C / 95
o
F]
[5]
38
o
C / 100
o
F
37
o
C / 98
o
F
0 RPM
3308 RPM
The settings on the screen are for reference only. Your version may not be identical to
this one.