DFI NP100-N16C - Manual (Page 108)

108
4
Supported Software
F6 Floppy Configuration Utility
You need to prepare an AHCI driver floppy diskette that you will need when you
install the AHCI driver during Windows 7 / Windows Vista installation. You may
also choose to copy the installation files to a USB flash drive.
1. Click “F6 Floppy Configura-
tion Utility” on the main
menu.
Windows Explorer will ap-
pear showing the locations
of the installation files.
2. Click the Organize menu
then click “Select All”.
3. Insert a blank formatted
floppy diskette into a floppy
disk drive or plug a USB
flash drive.