DFI NP100-N16C - Manual (Page 59)

59
3
BIOS Setup
Head
This field displays the number of read/write heads.
Precomp
This field displays the number of cylinders at which to change the write tim-
ing.
Landing Zone
This field displays the number of cylinders specified as the landing zone for
the read/write heads.
Sector
This field displays the number sectors per track.
Drive A
This field identifies the type of floppy disk drive installed.
None
No floppy drive is installed
360K, 5.25 in.
5-1/4 in. standard drive; 360KB capacity
1.2M, 5.25 in.
5-1/4 in. AT-type high-density drive; 1.2MB capacity
720K, 3.5 in.
3-1/2 in. double-sided drive; 720KB capacity
1.44M, 3.5 in.
3-1/2 in. double-sided drive; 1.44MB capacity
2.88M, 3.5 in.
3-1/2 in. double-sided drive; 2.88MB capacity
Video
This field selects the type of video adapter used for the primary system monitor.
Although secondary monitors are supported, you do not have to select the type.
The default setting is EGA/VGA.
EGA/VGA
Enhanced Graphics Adapter/Video Graphics Array. For EGA, VGA, SVGA and
PGA monitor adapters.
CGA 40
Color Graphics Adapter. Power up in 40-column mode.
CGA 80
Color Graphics Adapter. Power up in 80-column mode.
Mono
Monochrome adapter. Includes high resolution monochrome adapters.