DFI NP100-N16C - Manual (Page 65)

65
3
BIOS Setup
Typematic Rate (Chars/Sec)
This field allows you to select the rate at which the keys are accelerated.
Typematic Delay (Msec)
This field allows you to select the delay between when the key was first de-
pressed and when the acceleration begins.
Security Option
This field determines when the system will prompt for the password - everytime
the system boots or only when you enter the BIOS setup. Set the password in
the Set Supervisor/User Password submenu.
System
The system will not boot and access to Setup will be denied unless the cor-
rect password is entered at the prompt.
Setup
The system will boot, but access to Setup will be denied unless the correct
password is entered at the prompt.
APIC Mode
Leave this field in its default setting.
MPS Version Control for OS
This field is used to select the MPS version used by the system.
OS Select for DRAM > 64MB
This field allows you to access the memory that is over 64MB in OS/2. The op-
tions are: Non-OS2 and OS2.
Small Logo(EPA) Show
Enabled
The EPA logo will appear during system boot-up.
Disabled
The EPA logo will not appear during system boot-up.