Advanced chipset features, Bios setup – DFI NP100-N16C User Manual

Page 66

Advertising
background image

66

3

BIOS Setup

Advanced Chipset Features

This section gives you functions to configure the system based on the specific
features of the chipset. The chipset manages bus speeds and access to system
memory resources.

These items should not be altered unless necessary.

The

default settings have been chosen because they provide the best operating con-
ditions for your system. The only time you might consider making any changes
would be if you discovered some incompatibility or that data was being lost while
using your system.

DRAM Timing Selectable

This field is used to select the timing of the DRAM.

By SPD
The EEPROM on a DIMM has SPD (Serial Presence Detect) data structure that
stores information about the module such as the memory type, memory size,
memory speed, etc. When this option is selected, the system will run accord-
ing to the information in the EEPROM. This option is the default setting be-
cause it provides the most stable condition for the system. The “CAS Latency
Time” to “System Memory Frequency” fields will show the default settings by
SPD.
Manual
If you want better performance for your system other than the one “by SPD”,
select “Manual” then select the best option in the “CAS Latency Time” to
“System Memory Frequency” fields.

Phoenix - AwardBIOS CMOS Setup Utility

Advanced Chipset Features

DRAM Timing Selectable

x CAS Latency Time

x DRAM RAS# to CAS# Delay

x DRAM RAS# Precharge

x Precharge Delay <tRAS>

x System Memory Frequency

SLP_S4# Assertion Width

System BIOS Cacheable

Video BIOS Cacheable

Memory Hole At 15M-16M

PCI Express Root Port Func

** VGA Setting **

On-Chip Frame Buffer Size

DVMT Mode

DVMT/FIXED Memory Size

Boot Display

Panel Scaling

Panel Number

Item Help

Menu Level



By SPD

Auto

Auto

Auto

Auto

Auto

4 to 5 Sec.

Enabled

Disabled

Disabled

Press Enter

8MB

DVMT

128MB

Auto

Auto

3 : 1024*768 (18 bit)

↑↓→←

: Move

Enter: Select

F1: General Help

+/-/PU/PD: Value

F10: Save

ESC: Exit

F5: Previous Values

F6: Fail-Safe Defaults

F7: Optimized Defaults

The settings on the screen are for reference only. Your version may not be identical to

this one.

Advertising
This manual is related to the following products: