DFI NP100-N16C - Manual (Page 76)

76
3
BIOS Setup
Power On Function
This field allows you to use the PS/2 keyboard or PS/2 mouse to power-on
the system.
Keyboard 98
When this option is selected, press the “wake up” key of the Windows 98
compatible keyboard to power-on the system.
Button only
Default setting. Uses the power button to power on the system.
Hot Key
When this option is selected, select the function key you would like to use to
power-on the system in the “Hot Key Power On” field.
Mouse Left
When this option is selected, double-click the left button of the mouse to
power-on the system.
Mouse Right
When this option is selected, double-click the right button of the mouse to
power-on the system.
Any Key
Press any key to power-on the system.
Super IO Device
Move the cursor to this field and press <Enter>. The following screen will appear.
Phoenix - AwardBIOS CMOS Setup Utility
Super IO Device
Item Help
Menu Level

↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Power On Function
x Hot Key Power ON
Onboard FDC Controller
PWRON After PWR-Fail
Onboard Serial Port 1
Serial Port 1 Use IRQ
Onboard Serial Port 2
Serial Port 2 Use IRQ
Onboard Serial Port 3
Serial Port 3 Use IRQ
Onboard Serial Port 4
Serial Port 4 Use IRQ
W83627DHG.WDT Time
BUTTON ONLY
Ctrl-F1
Enabled
Off
3F8
IRQ4
2F8
IRQ3
3E8
IRQ10
2E8
IRQ11
0
The settings on the screen are for reference only. Your version may not be identical to
this one.