DFI NP100-N16C - Manual (Page 70)

70
3
BIOS Setup
Integrated Peripherals
OnChip IDE Device
Move the cursor to this field and press <Enter>. The following screen will appear.
Phoenix - AwardBIOS CMOS Setup Utility
Integrated Peripherals
Item Help
Menu Level

↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

OnChip IDE Device

Onboard Device

Super IO Device
Press Enter
Press Enter
Press Enter
IDE HDD Block Mode
IDE DMA Transfer Access
On-Chip Primary PCI IDE
IDE Primary Master UDMA
IDE Primary Slave UDMA
***
On-Chip Serial ATA Setting
***
x SATA Mode
On-Chip Serial ATA
x PATA IDE Mode
SATA Port
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Device
Item Help
Menu Level

↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Enabled
Enabled
Enabled
Auto
Auto
IDE
Auto
Secondary
P0, P2 is Primary
If your IDE hard drive
supports block mode
Select Enabled for
automatic detection of
the optimal number of
block read/writes per
sector the drive can
support
The settings on the screen are for reference only. Your version may not be identical to
this one.
The settings on the screen are for reference only. Your version may not be identical to
this one.