DFI NP100-N16C - Manual (Page 32)

32
2
Hardware Installation
DVI-I Port
1 1
DVI-I
The DVI-I port is used to connect an LCD monitor. This port supports DVI-D sig-
nal only.
Connect the display device’s cable connector to the DVI-I port. After you plug the
cable connector into the port, gently tighten the cable screws to hold the connec-
tor in place.
BIOS Setting
Configure the display device in the Advanced Chipset Features submenu of the
BIOS. Refer to chapter 3 for more information.