DFI NP100-N16C - Manual (Page 61)

61
3
BIOS Setup
Advanced BIOS Features
The Advanced BIOS Features allows you to configure your system for basic op-
eration. Some entries are defaults required by the system board, while others, if
enabled, will improve the performance of your system or let you set some fea-
tures according to your preference.

CPU Feature

Hard Disk Boot Priority
Virus Warning
CPU L1 & L2 Cache
Hyper-Threading Technology
Quick Powe-on Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
Typematic Rate Setting
x Typematic Rate (Chars/Sec)
x Typematic Delay (Msec)
Security Option
x APIC Mode
MPS Version Control For OS
OS Select For DRAM > 64MB
Small Logo(EPA) Show
Phoenix - AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Item Help
Menu Level

Select Removable Boot
Device Priority
↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Press Enter
Press Enter
Disabled
Enabled
Enabled
Enabled
Hard Disk
CDROM
LAN
Enabled
Enabled
On
Fast
Disabled
6
250
Setup
Enabled
1.4
Non-OS2
Disabled


The screen above list all the fields available in the Advanced BIOS Features submenu,
for ease of reference in this manual. In the actual CMOS setup, you have to use the
scroll bar to view the fields. The settings on the screen are for reference only. Your
version may not be identical to this one.