Digital Alert Systems DASAMS - Manual (Page 28)

Digital Alert Systems
AMS Installation /Operation & Integration Guide
Revision 1.1 Page 28 of 28
Specifications
AUDIO MESSAGE CONTROLLER
LAN Interface: TCP/IP Ethernet
• One (1) 10/100BASE-T Ethernet IEEEE 802.3
• RJ-45 connectors suited for wiring CAT-5 or above
• Port features link & data indicators
• Assignable IP addressing (unit ships fixed at 192.168.0.210)
USB Interface
• • Four (4) USB 2.0 type A sockets
Front Panel Indicators:
• Power - Green
Physical Attributes:
• 19.0”W x 10.0”D x 1.75”H (1RU EIA rackmount)
• Weight: 4lbs
Power Requirements:
• Input 120VAC @ .25 amps (10 Watts)
MULTIPLAYER
Audio Inputs: (varies by configuration settings)
Digital Audio
• Balanced AES/EBU digital audio (program in) 110 ohm female XLR
Analog Audio
• One-pair (1) balanced 600 ohm stereo audio (program in) female XLR Audio Outputs: (varies by configuration
settings) Digital Audio
• Balanced AES/EBU digital audio (program out) switched 110 ohm male XLR
• Auto-set to incoming sample rate, or 48 KHz without reference input Analog Audio
• One-pair (1) balanced 600 ohm stereo audio (program out) male XLR
LAN Interface: TCP/IP Ethernet
• One (1) 10/100/1000BASE-T Ethernet IEEEE 802.3
• RJ-45 connectors suited for wiring CAT-5 or above
• Port features link & data indicators
• Assignable IP addressing (unit ships fixed at 192.168.0.220)
GPI/O’s (General Purpose Inputs/Outputs):
• Four (4) software defined inputs per channel
• Two (2) software defined outputs rated 2A @ 30VDC per channel
• 10-pin detachable terminal strip per channel
Front Panel Indicators:
• Alert Pending one per channel - Amber
• On-Air one per channel - Red
• Master Audio - Blue
• Power - Green
Physical Attributes:
• • 19.0”W x 10.0”D x 1.75”H (1RU EIA rackmount)
Weight:
• 8lbs
Power Requirements:
• • Input 120VAC @ .25 amps (30 Watts)