Digital Audio Labs Livemix CS-DUO Personal Mixer User Guide - Manual (Page 40)

LIVEMIX CS-DUO 38
SETTING THE GLOBAL CLOCK
PRESS the Set Global Clock button to bring up the
Global Clock setup page.
This screen allows you to set the time of day, as well
as the calendar date, for the system.
• PRESS any of the six time/date fields to adjust it,
or alternatively PRESS the ADJUST knob to cycle
through the six fields.
• The selected field will turn gray; you can then
ROTATE the ADJUST knob to change the value
of that field.
• PRESS the “X” button when you are finished
adjusting the date and time
The date and time data will be written to any mixes or templates saved to a USB flash drive.
LIVEMIX VERSION INFO
PRESS the Livemix Version Info button to bring up a
page that displays the firmware versions for the CS-
DUO, MIX-16/32, and Dante option card.
The firmware on the CS-DUO, MIX-16/32 and Dante
option card are user updateable. To find out if your
Livemix system needs an update, you can check the
current firmware versions at http://www.digitalaudio.
com/support .
The CS-DUO firmware is for the local personal mixer.
The MIX-16/32 and Dante option card information
is for the system. Each CS-DUO will require its own
firmware update.
You may initiate a firmware update by pressing
the “Update CS-DUO Firmware” button. Detailed
firmware update information is in the Livemix Firmware
Update section of this manual.
NOTE:
If your CS-DUO firmware is older than
version 1.27, you will not see this
option. Proceed to the Updating Livemix
Firmware section of this manual for
instuctions for updating the firmware.