ESI MaXiO 032 - Manual (Page 18)

MaXiO series System Manual
18
3.3 MaXiO 032 connection
After the MaXiO PCI/PCIe host card is installed in the PCI/PCIe slot, you should connect MaXiO
032 to the card using the supplied M.D.I cable.
Start by connecting the MaXiO breakout box with the M.D.I In connector on MaXiO breakout box
with the M.D.I port on the MaXiO PCI/PCIe host card as shown on the picture below. If you have
EX8000 units too, connect it to the E.D.I port and so on.