ESI MaXiO 032 - Manual (Page 8)

MaXiO series System Manual
8
2.1.2 M.D.I connector
The M.D.I connection can handle 32 digital input and 32 digital output streams for the extension of
MaXiO 032 breakout box.
* In the basic MaXiO XD system, the MaXiO PCI/PCIe card connects to the special M.D.I
breakout cable (described below).
2.2 EX8000
2.2.1 Front Panel Input Channel Section
Analog Balanced XLR / TRS (Combo) Input Connector
EX8000 provides 8 combo connectors (XLR and 1/4" TRS) on
the front panel that are used as balanced analog inputs for line
level signals and microphone connection (via XLR).
Microphone Input Selection Switch
Every input channel can be used for line level or microphone
signals. When this switch is enabled, a microphone can be
connected via XLR. In this case phantom power is supplied
(when enabled, check
). When the switch is not enabled, the
XLR and TRS inputs are used for balanced line level signals.
Input Gain Control
Controls the amount gain applied to the input signal from the
XLR or TRS connector of specific channel. Microphone signals
1 3
2
4
1
2
3
7