ESI MaXiO 032 - Manual (Page 51)

MaXiO series System Manual
51
EX8000
y General
Type 19" rack mounted, digital audio interface
Audio Total 8-in / 8-out, 24bit, audio interface
System Clock Support Internal (44.1, 48.0, 88.2, 96.0, 176.4, 192.0 kHz), Word Clock, Digital In, E.D.I
WORD Clock IN FS / 256*FS, BNC Connector
Power AC IN 100V ~ 240V, 50Hz ~ 60Hz, 30W
Weight 3.5kg
Dimensions 482(mm) x 180(mm) x 86(mm)
y Analog Inputs
Type Balanced 1/4” TRS (Balanced XLR ) Input
Level +4dBu Nominal (@-16.2dBFS) , +20.2dBu max
Gain Range 0.0dB (@Gain min, +20.2dBu max) ~ +29.0dB (@Gain max, -7.8dBu max)
Frequency Response 20Hz to 20kHz, +/- 0.1dB
THD + N 0.0003% A-weighted (@ -3dBFS)
Dynamic Range 116dB A-weighted
CMRR 75dB
Impedance 10K ohm (1/4” TRS), Low impedance : 3K ohm (XLR)
A/D Converter Type
Dynamic Range
S/(N+D) Ratio
Frequency Response
Interchannel Isolation
Gain Mismatch
24bit, 192KHz, 128X Oversampling
123dB (@ -60dBFS with A-Weighted)
110dB (@ -1dBFS, measurement method)
6.5 ~ 21.768KHz, +/- 0.001dB (@ fs=48KHz)
6.5 ~ 43.536KHz, +/- 0.003dB (@ fs=96KHz)
6.5 ~ 87.072KHz, +/- 0.007dB (@ fs=192KHz)
123dB
0.1dB
y Microphone Pre-amp
Type Balanced XLR (+48V Phantom Power support)
Level 500 mV max (-3.8dBu)
Gain Range +25.0dB (@Gain min, -3.8dBu) ~ +73dB (@Gain max, -51.8dBu)
Equivalent Input Noise - 135.5dBu (@ 0 ohm, 20Hz ~ 20kHz)
THD + N 0.00065% A-weighted (@ gain+35dB)
Dynamic Range 103dB A-weighted (@ gain +35dB)
CMRR 90dB
Impedance 1.5K ohm
y Analog outputs
Type +4dBu Balanced XLR output
-10dBv Balanced/Unbalanced 1/4” TRS output
Level +4dBu Nominal (@-16dBFS) , +20.0dBu max
-10dBu Nominal (@-16dBFS) , +8.2dBu max
Frequency Response 20Hz to 20kHz, +/- 0.05dB
Analog Filter 3-pole low-pass filter
THD + N 0.0001% A-weighted (@ -3dBFS)
Dynamic Range 118dB A-weighted
Impedance 110 ohm (1/4” TRS), 110 ohm (XLR)
D/A Converter Type
Dynamic Range
S/(N+D) Ratio
Frequency Response
Interchannel Isolation
Gain Mismatch
24bit, 192KHz, 128X Oversampling, 8 times digital filter
120dB (@ -60dBFS with A-Weighted)
100dB (@ -1dBFS, measurement method)
0 ~ 21.7KHz, +/- 0.002dB (@ fs=48KHz)
0 ~ 43.5KHz, +/- 0.002dB (@ fs=96KHz)
0 ~ 87.0KHz, +/- 0.002dB (@ fs=192KHz)
120dB
0.15dB
y Digital Audio
AES/EBU, Coaxial (S/PDIF) Connector
Impedance
Format
Sample rate
XLR (AES/EBU), RCA (S/PDIF) I/O
XLR : 110ohm, RCA : 75ohm
IEC-60958 Professional / Consumer
44.1, 48.0, 88.2, 96.0, 176.4, 192.0 kHz
ADAT Connector
Format
Sample rate
TOS-Link (Optical) I/O
ADAT® protocol
44.1, 48.0kHz (8channel)
88.2, 96.0kHz (4channel - SMUX )
176.4, 192.0kHz (2channel - SMUX )
E.D.I Connector
Format
Sample rate
IEEE1394 compatible
E.D.I protocol
44.1, 48.0, 88.2, 96.0, 176.4, 192.0 kHz (8 channel)