ESI MaXiO 032 - Manual (Page 35)

MaXiO series System Manual
35
the device connected to the Word Clock input is configured as clock master. You can choose
between FS (Word Clock) or 256FS (Super Clock) settings.
5.4.3 I/O Config
Analog: This where you adjust the analog output level of the analog output channel of the MaXiO
PCI/PCIe host card. This analog output is only available when you have connected a device to the
M.D.I port with analog outputs (such as the MaXiO 032 breakout box).
S/PDIF: this can be Pro, which means that actually an AES/EBU signal with the ‘professional’
status bit set is transferred via the S/PDIF I/O of the MaXiO PCI/PCIe host card (via the M.D.I
connection, e.g. the M.D.I breakout cable), or it can be Consumer, which means that normal S/PDIF
signals are transferred.