ESI Waveterminal U24 - Manual (Page 33)

33
Caution: Even Two U24 control panel looks different, they have same
functions and its same name.
I N P U T / O U T P U T L E V E L F A D E R S
1. Level Faders
Click and drag to change the input and output levels. U24 is fixed
to use –10dBV input/output reference level. Check the manuals of
the audio equipment you want to connect to U24’s inputs. It should
be –10dBV device. The numbers on the bottom show the relative
levels in dB. When you place mouse cursor over the level fader,
fader will light in blue and mouse cursor changed to cross arrow
figure. You can use wheel mouse or click the fader and drag to
adjust the value of I/O level.
2. GANG MODE
Links the L-R faders for stereo operation. Un-select the Gang
Mode if you need to control the left and right levels independently.
U S B W A V E I N S E L E C T
Select the input source type for audio recording.
1. ANALOG IN
Selects the analog input port (-10dBV unbalanced) on the U24 as
the USB wave input source.
2. DIGITAL IN
Selects the digital input port (SPDI/F Coaxial or Optical) on the
U24 as the USB wave input source.
D I G I T A L I N S E L E C T
Select the input connector type for your digital audio input.