ESI Waveterminal U24 - Manual (Page 35)

35
A N A L O G O U T M I X E R
This is where you select the source that is routed to the Analog Output
jacks of U24. You can select either Analog In or Digital In for input
monitoring. USB WAVE OUT can be selected simultaneously with one of
the input source monitoring.
1. ANALOG IN
Signal connected to Analog Input ports of U24 is routed to the
Analog Output ports for input monitoring.
2. DIGITAL IN
Signal connected to Digital Input port of U24 is routed to the
Analog Output ports for input monitoring.
3. USB WAVE OUT
Output of wave device selected to USB Audio Device is routed to
the Analog Output ports for monitoring.
D I G I T A L O U T M I X E R
This is where you select the source that is routed to the Digital Output
jacks (Coaxial and Optical) of U24.
1. ANALOG IN
Signal connected to Analog Input ports of U24 is routed to the
Digital Output ports for input monitoring.
2. DIGITAL IN
Signal connected to Digital Input port of U24 is routed to the
Digital Output port for input monitoring.