ESI Waveterminal U24 - Manual (Page 48)

48
up to 32kHz (11x 3). Real Time Sample Rate Converting functions only
for incoming digital signal. Connect digital source to Coaxial/Optical
Input port and choose desired sampling rate. Now the sampling rate of the
signal you can get from digital output port is converted.
However, you cannot change the sampling rate of .wav file that playback
through the application. If you try to convert it, it only sounds like
sampling up (faster speed than normal) or sampling down (slower than
normal).
D I G I T A L O U T ( I E C 9 5 8 ) T Y P E
Digital Out Type selector determines the type of data format to be used on
the digital output jack of U24.
1. CONSUMER (IEC 958 Type II)
Generally known as S/PDIF (Sony Phillips Digital Interface), select
this mode if you are sending digital audio output from U24 to a
S/PDIF equipped audio device.
2. PROFESSIONAL (IEC 958 Type I)
Generally known as AES/EBU, select this mode if you are sending
digital audio output from U24 to an AES/EBU audio device.
Important Notice: Since the adaptation of IEC958 no longer
distinguishes between S/PDIF and AES/EBU, some of the older
AES/EBU audio equipment requires a higher signal level than
U24’s digital output levels (which conform to IEC 958 standards).