ESI Waveterminal U24 - Manual (Page 5)

5
Functions as an independent Signal Converter
When Digital In Clock Source is selected, U24 can be operated as an
independent signal converter. In this mode, U24 is completely
disconnected with the computer, but it will send out any incoming
signal to both analog and digital output ports.
ASIO2.0 and MME driver support
You can use U24 with ASIO2.0 applications such as a Cubase, Nuendo
and also MME applications such as Cakewalk, Samplitude.
3. System Requirement
Most of all, your system has to have at least one available USB port to
use U24.
PC
1. Intel Pentium II 400 MHz CPU or equivalent AMD CPU
2. Windows 98SE/ME/2000/XP operating system
3. 1 open USB port
4. 128MB RAM
5. Digital audio recording/playback software
MAC
1. Power Macintosh G3 or higher
2. Mac OS 9.0 to 9.2.x
3. One available USB port
4. “USB Device Extension” version 1.4.1 or later is needed
5. 128MB of RAM
(Highly depends on the system requirements of your audio software)