ESI Waveterminal U24 - Manual (Page 8)

8
5. External Connections
U24 has many features that can enhance your audio production
environment. If you are serious enough to about your digital audio, you
may want to take time to read through this section carefully. While you
may not need all of these features, and simply opt to plug in the cables
to get started right away, you should at least be aware of U24’s
capabilities – in case you need them later on.
B A S I C C O N N E C T I O N S
In a typical audio production studio or workstation, where you have
both digital and analog devices, this set up treats your PC or Macintosh
as a stereo master recorder. In this case, monitoring of U24 will be
similar to “through-the-tape” monitoring, where you monitor your
input and output sources from the tape recorder’s point.
Front panel of U24
If you plan to use U24 in a digital mastering environment, you may
choose to connect analog outputs of U24 directly to your power
amplifier’s inputs instead of sending it through the console/mixer.
IN SEL
SESEL
L -Analog In - L -Analog Out -R
From the stereo
output of an external
analog audio device To the monitor system
or stereo input of
mixer