ESI Waveterminal U24 - Manual (Page 43)

43
U S B W A V E I N S E L E C T
Select the input source type for audio recording.
1. ANALOG IN
Selects the analog input port (-10dBV unbalanced) on the U24 as
the USB wave input source.
2. DIGITAL IN
Selects the digital input port (SPDI/F Coaxial or Optical) on the
U24 as the USB wave input source.
D I G I T A L I N S E L E C T
Select the input connector type for your digital audio input.
1. COAXIAL
Selects the Coaxial input port (RCA type S/PDIF format) on the
U24 as the digital input source.
2. OPTICAL
Selects the Optical input port (Tos-link, S/PDIF format) on the U24
as the digital input source.
C L O C K S O U R C E
Clock Source determines that U24 will reference to. Clock Source is the
time reference that determines precisely where each digital audio sample
begins and ends. Also, Clock Source in U24 control panel gives unique
function to the unit by selecting between two different sources.
1. INTERNAL
Selects U24’s on-board clock source as the reference. This is the
default mode for recording analog/digital audio through U24. Use