ESI Waveterminal U24 - Manual (Page 55)

55
9. Using U24 in MAC
1) Working with Applications
Today, most digital audio applications support ASIO, and U24 works with
them once it has been installed properly. It’s just a matter of selecting the
sample rate and the bit depth of your preference from thereon. You should
refer to the specific application’s manual on how to setup the hardware and
optimize the audio recording and playback capabilities. If you have
problems or questions with setting up U24 on your application please
contact our technical support.
Here are some examples how you make a proper ASIO setup for the
application to use with U24:
P E A K 2 . X
1. Choose the menu Audio > Sound Out > ASIO.
2. Choose “EgoSys Waveterminal U24” from “Driver” popup menu.
3. The clock source should be “internal” unless you need digital sync.
4. Choose the right playback sample rate and channels (refer to the
Peak manual).
5. Click the “Driver Setup…” button to open the U24 ASIO control
panel. Choose the proper settings.