ESI Waveterminal U24 - Manual (Page 44)

44
this mode if you are recording audio signal, playing back audio file
or using Real-time Sampling Rate Converter.
2. DIGITAL IN
Selects the digital audio input’s data as the clock source. Selecting
this mode causes U24 functions as an independent operation status
from computer. As you can see below, USB WAVE IN SELECT
section is disappeared and USB WAVE OUT of
ANALOG/DIGITAL OUT MIXER section is disabled.
In this mode, you can operate U24 as a signal converter, but U24 is
now completely separate from the computer. That means you
cannot record any input source to the computer and play any audio
source from the computer. However, any incoming audio signal
(either analog or digital) can be sent out through three different