Flowserve IDP CPXV - Manual (Page 39)

CPXV and CPXRV USER INSTRUCTIONS ENGLISH 71569193 09-14
Page 39 of 48
flowserve.com
8.5 CPXV and CPXRV bearing options
Rigid coupling option
Item Description
7120 Rigid coupling (split)
Silicon carbide line bearings option
241.2 Tolerance ring
241.3 Tolerance ring
241.4 Tolerance ring
2530.2 Retaining ring
2530.3 Retaining ring
3300.1 Bearing bush
3300.2 Bearing bush (intermediate)
3400.1 Bearing sleeve
3400.2 Bearing sleeve (intermediate)
6569.1 Plug
6570.10 Screw
6570.11 Screw
6570.12 Screw
6570.14 Screw
Oil lubrication option
3855 Constant level oiler
4223 Pumping ring
6569.2 Plug (breather)
6569.3 Plug (oil drain)
Labyrinth ring option
4330 Labyrinth ring
Flinger option (short depths)
2540.2 Flinger (liquid)
6570.13 Screw
4330
241.4
2530.3
241.3
3300.1
3400.1
2530.2
3400.2
3300.2
241.1
6569.1
6570.10
241.2
6570.11
6570.12
PAIR OF 40° ANGULAR CONTACT BEARINGS,
GREASE LUBRICATED.
(NO SLEEVE (2400.3) FITTED ON SHAFT
SIZES 1 & 2)
PAIR OF 40° ANGULAR CONTACT BEARINGS
WITH OIL LUBRICATION OPTION.
(NO SLEEVE FITTED ON SHAFT SIZES 1 & 2)
PROPRIATORY LABYRINTH RING
FITTED INTO RETAINING RING,
SHOWN WITH OPTIONAL FLINGER
SHAFT RIGID COUPLING
4223
6569.3
6569.2
3855
7120
2540.2
6570.13
Proprietary labyrinth ring fitted into retaining ring.
Shown with optional flinger
Pair of 40 degree angular contact bearings with
oil lubrication option. (No sleeve fitted on shaft
sizes 1 and 2.)
Pair of 40 degree angular contact bearings,
grease lubricated. (No sleeve [2400.3] fitted
on shaft sizes 1 and 2.)
Shaft rigid coupling
Drawings taken from B736/048, sheet 3, rev F