Datalogic Scanning QUICKSCAN QD 2300 - Manual (Page 126)

Symbologies
120 QuickScan ® L
Overfilling Transmission Buffer
The Code 39 buffer holds 200 characters. If the bar code just read results in an overflow
of the transmission buffer:
• The scanner indicates that the bar code was rejected by issuing three long, high beeps.
• No transmission occurs. The data in the buffer is not affected.
Attempt to Transmit an Empty Buffer
If the bar code just read was the Transmit Buffer bar code and the Code 39 buffer is emp-
ty:
• A short low/high/low beep signals that the buffer is empty.
• No transmission occurs.
• The buffer remains empty.
Code 93
Enable/Disable Code 93
To enable or disable Code 93, scan the appropriate bar code below.
Enable Code 93
*
Disable Code 93