Datalogic Scanning QUICKSCAN QD 2300 - Manual (Page 33)

Prefix/Suffix Values
Product Reference Guide 27
Prefix/Suffix Values
A prefix and/or suffix can be appended to scan data for use in data editing as described
in the feature description,
Global Prefix/Suffix on page 28 .
To set a value for a prefix or suffix:
1. Change the scan data format using the instructions in the feature description, Global
Prefix/Suffix on page 28 .
2. Scan the appropriate prefix/suffix bar code below.
3. Scan a four-digit number (i.e., four bar codes from Appendix E, Keypad ) that corre-
sponds to that value.
4. To correct an error or change a selection, scan Data Format Cancel on page 29 .
NOTE
When using host commands to set the prefix or suffix, set the key
category parameter to 1, then set the 3-digit decimal value corre-
sponding to the desired keystroke as listed in
Table 34 on page 167
(results in a four-digit ASCII code).
Set Prefix
Set Suffix